Open Source Robotics

精選高品質的開源機器人專案、工具與軟體,推動機器人社群向前發展。

GPT-6 Astra 用借來的 SO-101 畫出金門大橋

SO-101 Open Robot Arm

  • 製作者: thijs

一支向同事借來的 SO-101、一支用膠帶固定在夾爪上的畫筆、一台相機,以及一個被要求畫出金門大橋的通用代理。沒有策略、沒有示範,也沒有釋出任何機器人專屬的程式碼:模型自己摸索出如何操控手臂,而且在一次次嘗試中明顯進步。

如何操控

根據製作者本人對設定的描述:代理被「指示規劃 1 分鐘的動作,並在背景監控,隨時進行調整」。在每次執行之間,他會回饋代理的表現,有時會問它「你可以怎麼做得更好?」,並讓它改寫自己的指令。

值得注意的是校正。他一開始提供了幾個錨點,但在後來的嘗試中,代理自己摸索出校正方式,並修正自己的定位誤差:這種自我校正並非事先編寫,而是從回饋迴圈中自然浮現。

成果

發布的縮時影片長約一分鐘,呈現了各次嘗試的進展:早期的作品幾乎認不出來,後來的作品則清楚看得出是那座橋。製作者本人對這件事的定位(在任何人提出之前就主動說明)是「演算法藝術,類似筆式繪圖機那樣」,而且他不認為這會取代藝術家。

沒有提供的東西

沒有儲存庫、沒有部落格文章,也沒有釋出提示詞。有人在回覆中直接問是否有說明文章,製作者並沒有發布。以上內容全部來自該討論串本身。手臂借自 Toby Simonds,討論串中有向他致謝。

為什麼會廣為流傳

這段影片在機器人圈之外也引起廣泛關注:Sam Altman 回覆「i want one!」,還促成了一段 TBPN 節目,製作者在節目中主張,接上代理的便宜開源手臂即將迎來屬於自己的 3D 列印熱潮。

詳細資訊

  • arm: SO-101 (borrowed)
  • agent: GPT-6 Astra
  • posted: 8 September 2026
  • sensing: Single camera
  • difficulty: Intermediate
  • calibration: Seeded with anchor points; agent self-calibrated on later attempts
  • end_effector: Paintbrush held in the stock gripper
  • code_released: None
  • control_style: Agent plans ~1 minute of actions, monitors and adjusts in the background

照片與影片

  • The build and timelapse: The root post: a ~1 minute timelapse of the arm painting the bridge across successive attempts.
  • How the agent was instructed: The builder's description of the control loop, the feedback between runs, and the agent rewriting its own instructions and self-calibrating.
  • The progression across attempts: A short clip comparing early and late attempts.
  • Credit for the arm: The SO-101 was borrowed from Toby Simonds.
  • TBPN segment: The builder on TBPN arguing that cheap open-source arms plus agents are heading for a 3D-printing-style boom.

連結

  • 製作者: https://x.com/cdngdev

本網站需要 JavaScript 才能正常運作。請啟用 JavaScript 以瀏覽我們的開源機器人專案。