Open Source Robotics

A curated collection of high-quality open source robotics projects, tools, and software to propel the robotics community forward.

Piezoresistive Tactile Sensor

  • Also called: resistive tactile sensor
  • Category: Sensing › Contact & force
  • Tags: tactile-sensing, piezoresistive, flexible-electronics, pressure-sensing, wearables

A tactile sensor whose sensing material changes electrical resistance under pressure or strain, read as a voltage or current; common in low-cost arrays, robot skin and tactile gloves.

Definition

A piezoresistive tactile sensor measures contact through a change in electrical resistance. Pressing on the sensing material deforms it, its resistance changes, and a simple circuit, usually a voltage divider or a transimpedance amplifier, turns that change into a voltage that an analog-to-digital converter can read. The piezoresistive effect itself, a change in a material's resistivity under mechanical stress, is strong in semiconductors and was characterized in silicon and germanium by Smith in 1954; it is the basis of silicon strain gauges and many MEMS pressure sensors.

In robot tactile sensing the most common materials are not crystalline semiconductors but conductive composites and textiles: elastomers or foams filled with carbon black, carbon nanotubes or metal particles, carbon-loaded polymer films such as Velostat, and conductive fabrics and yarns. In these materials most of the resistance change comes from structure rather than resistivity: compression brings conductive particles or fibers into closer contact and increases the contact area between layers and electrodes. This makes the response strongly nonlinear, typically with large changes at light pressure that flatten out at high pressure, along with hysteresis, creep under steady load, drift and temperature sensitivity. Arrays are made by crossing row and column electrodes on either side of a sensing layer, so each crossing forms a taxel; reading them requires multiplexing and techniques to suppress crosstalk through neighboring elements.

Piezoresistive sensors measure static as well as changing pressure, unlike piezoelectric sensors, which respond mainly to changes. They are cheap, thin, flexible and scale to large areas, which is why they appear in tactile gloves, robot skins and pressure mats. They mostly report normal pressure with modest accuracy, so they suit contact detection and pressure maps better than precise force measurement. A force-sensitive resistor is one common packaged form, a single thin-film element; a piezoresistive tactile sensor more generally includes arrays, fabrics and MEMS devices built on the same principle.

Why it matters

Piezoresistive sensing is the most accessible way to add touch to a robot or glove: the materials are inexpensive, the electronics are simple and large areas can be covered. Knowing its nonlinearity, hysteresis and crosstalk is what separates a usable pressure map from noisy readings.

Key applications

  • Tactile gloves for recording human grasps and teleoperation
  • Fingertip and palm arrays on robot grippers and hands
  • Large-area robot skin for contact and collision detection
  • Pressure-mapping mats and insoles for gait and posture analysis
  • Low-cost touch and grip sensing in maker and prosthetic projects

In practice

A research group builds a tactile glove by sandwiching a piezoresistive film between two layers of conductive thread stitched in perpendicular rows and columns, so each crossing becomes a taxel. A microcontroller drives one row at a time and reads every column through an analog multiplexer, while the undriven rows are held at a fixed potential to reduce crosstalk through neighboring elements. Each taxel is calibrated with known loads and fitted with a nonlinear curve, and the baseline is recaptured at the start of every session because the film drifts. The pressure frames, recorded while people grasp everyday objects, are used to train models that recognize objects and estimate grasp forces, and later as tactile inputs for a robot hand fitted with the same material.

Common misconceptions

  • Piezoresistive and piezoelectric sensors are interchangeable — piezoresistive sensors measure static pressure through resistance change, while piezoelectric sensors generate charge and respond mainly to changing loads
  • Resistance is proportional to force — the response of composite and fabric sensors is strongly nonlinear and shows hysteresis and creep, so calibration curves are needed
  • Every piezoresistive tactile sensor is a force-sensitive resistor — FSRs are one packaged form; arrays, conductive fabrics and silicon MEMS sensors use the same principle in different ways
  • A piezoresistive array measures shear and full contact force — most designs respond mainly to normal pressure unless they are specifically structured for shear

Who should know this

  • Tactile sensor and robot skin designers
  • Engineers building tactile gloves and wearable sensing
  • Gripper and robot hand developers
  • Makers adding low-cost touch sensing to projects

Related technologies

  • Velostat
  • Conductive Fabric and Yarn
  • Carbon-Filled Elastomers
  • MEMS Strain Gauges
  • Analog Multiplexers

Related terms

  • Tactile Sensor
  • Force-Sensitive Resistor
  • Taxel
  • Camera-Based Tactile Sensor
  • Dexterous Manipulation

Related projects

  • ORCA Hand: Open-source tendon-driven robotic hands with tactile sensing from ETH Zurich
  • OpenTac: Open flex-PCB tactile skins that sense normal and shear force, made for any robot surface
  • Robotic Origami Challenge: Fold Plane Demonstrations: Bimanual paper-folding dataset: 682 LeRobot episodes with vision and touch

This website requires JavaScript to function properly. Please enable JavaScript to explore our collection of open source robotics projects.