Open Source Robotics

A curated collection of high-quality open source robotics projects, tools, and software to propel the robotics community forward.

Backdrivability

  • Also called: Backdriveability, Back-drivability, Transparency, Backdrivable
  • Category: Actuation & drivetrain › Ratings
  • Tags: actuation, transmission, compliance, safety, legged-robots

Whether a joint can be moved by pushing its output — the property that decides if a robot can feel contact and be moved by hand.

Definition

Backdrivability is the extent to which a joint can be driven backwards: pushed at the output and made to turn the motor, rather than only the other way round. A direct-drive motor is almost perfectly backdrivable; a worm gear or a high-ratio strain-wave gearbox is effectively not backdrivable at all.

It is set mostly by gear ratio and friction. Reduction multiplies output torque, but it multiplies the reflected inertia and friction seen from the output by the square of the ratio — which is why a 10:1 drive can still be pushed by hand while a 100:1 drive of similar quality cannot. This is the central trade in actuator design: torque density pulls towards high reduction, transparency pulls the other way, and quasi-direct-drive actuators exist precisely to sit at a deliberate point between them.

Backdrivability matters beyond feel. A backdrivable joint can sense contact through motor current alone, with no force sensor, because an external push shows up electrically. It can absorb an impact by yielding rather than transmitting the shock into the gears. And it can be moved by a person — which is both a safety property and a usability one, since a non-backdrivable arm that loses power becomes a rigid obstacle.

Why it matters

Backdrivability decides whether a robot can be safe around people, whether it can feel what it touches without extra sensors, and whether anyone can move it in an emergency. It is also the property most often lost by accident: builders reach for more reduction to get torque and discover they have traded away the compliance the application actually needed. The Quasi Direct Drive term exists because a whole generation of legged robots was designed around exactly this trade-off.

Key applications

  • Legged robots sensing ground contact through motor current instead of foot sensors
  • Collaborative arms that must yield when a person pushes them
  • Teaching a robot a trajectory by physically guiding it through the motion
  • Emergency situations where a powered-down arm must be moved by hand
  • Impact-heavy tasks where yielding protects the gearbox

In practice

You test it the obvious way — power the joint down and push the output. Roughly, direct drive and single-stage reductions up to about 10:1 remain genuinely backdrivable; 20:1 to 50:1 is marginal and depends heavily on the gear type; above that, only with significant force. Cycloidal and planetary drives backdrive more readily than strain-wave gears of the same ratio because they carry less friction, and worm drives are deliberately non-backdrivable, which is useful when you want a joint to hold position with the power off.

Common misconceptions

  • Backdrivable means weak — it describes transparency, not torque capacity; the trade is against reduction ratio, not against strength
  • It is a yes or no property — it is a spectrum, and where a design sits depends on ratio, gear type, friction and lubrication
  • Any gearbox backdrives with enough force — worm drives and high-ratio strain-wave gears are effectively locked, which is sometimes exactly what you want
  • Adding a force sensor makes backdrivability unnecessary — a sensor tells you about contact, but a non-backdrivable joint still cannot yield to it quickly

Who should know this

  • Anyone choosing a gear ratio for a robot joint
  • Builders of legged robots and collaborative arms
  • Anyone who needs contact sensing without adding force sensors
  • Designers thinking about what happens when the power fails
  • Students learning why actuator choice and control strategy are one decision

Related terms

  • Quasi Direct Drive
  • Direct Drive
  • Torque Control
  • Harmonic Drive
  • Gear Ratio

Related projects

  • Extreme Parkour with Legged Robots: RL system for legged robot parkour trained in under 20 hours
  • PACE Sim2Real: Systematic sim-to-real transfer via actuator dynamics identification
  • NASA Ogma: NASA runtime monitor generator for safe robotics and flight systems

Videos

  • BEAR: Backdrivable Robot Actuator for Legged Robots, Humanoid Robots, or Robot Arm Manipulators: Kevin Wood | Robotics & AI
  • “90mm High-Stiffness Backdrivable Actuator | 200Nm Peak Torque!”: Robotics for Better World

This website requires JavaScript to function properly. Please enable JavaScript to explore our collection of open source robotics projects.