H-RTK NEO-F9P Rover (IP66, RM3100 Compass), DroneCAN
- Supplier: Holybro
- Category: RTK GNSS Board
- Model: 12072
- Price: $199
RTK GNSS receiver built on the u-blox NEO-F9P with a PNI RM3100 compass, an STM32G473 processor, an ICM42688 IMU and an ICP20100 barometer. It connects to a Pixhawk CAN port over DroneCAN with a 4-pin GH1.25 cable, is rated IP66 and weighs 63.5 g. On 2 Nov 2026 Holybro's store showed this DroneCAN version as unavailable, while the two UART versions (12060 and 12061) were available at $189.
Specifications
- weight: 63.5 g
- accuracy: 0.01 m + 1 ppm CEP horizontal (RTK)
- frequency: L1 + L5 (B1I, B2a, E1B/C, E5a, L1C/A, L1OF, L5)
- gnss_chip: u-blox NEO-F9P
- interface: DroneCAN 1 Mbit/s, GH1.25 4-pin cable, Pixhawk CAN port
- dimensions: 61.99 mm diameter x 21 mm height
- update_rate: RTK 7 Hz max, PVT 7 Hz max, RAW 10 Hz (GPS+GLO+GAL+BDS)
- constellations: BeiDou, Galileo, GLONASS, GPS, QZSS; 4 concurrent
Where to buy
- Holybro Store: https://holybro.com/products/h-rtk-neo-f9p-rover-rm3100-compass