Open Source Robotics

A curated collection of high-quality open source robotics projects, tools, and software to propel the robotics community forward.

Sowbot

Open agricultural robot: a containerised ROS 2 stack and reference hardware in development

License

MIT

Overview

Sowbot is an open agricultural robot being built by the UK's Agroecology Lab for researchers, smallholders and ag-tech startups. Its working part today is a containerised ROS 2 Jazzy stack: dual u-blox RTK-GNSS with sensor fusion, topological navigation from the Lincoln Centre for Autonomous Systems running over Nav2, row plans generated with Fields2Cover, visual crop-row following, safety monitoring, a web cockpit for teleop and mission planning, and a Gazebo simulation in which multi-row missions already run end to end. Real-time motor control runs on an ESP32 under Zauberzeug's Lizard firmware, and the stack stays compatible with the Field Friend devkit it grew from. The reference hardware — a two-computer 'brain' in a waterproof enclosure and a tracked field chassis — is published as an open design on the project site and is still being built.

The software and the hardware are at very different stages, and the project is unusually honest about which is which. The repository carries a roadmap in which every feature has a status and a self-assessed technology-readiness level. Containerised deployment, device addressing, the web cockpit, the RTK-GNSS driver and the Gazebo simulation are done. Topological navigation, RTK localisation, the dual-computer split, safety monitoring and visual row-following are marked roughly 70 to 90 percent done, most at TRL 3 or 4: they work in simulation, and the row-follower has been iterated against a real lettuce crop, but full field validation on hardware is still listed as pending. Lever-arm offsets for the GNSS antennas are, in the project's own words, zeroed placeholders.

On the hardware side, the 'brain' — two ARM single-board computers, an ESP32 for real-time control, dual RTK receivers and a CAN interface in a sealed aluminium enclosure — has been fabricated and is in testing. The full-size body is mid-pivot from wheels to tracks and its bill of materials is under review, a one-third-scale development platform needs assembly, and the small wheeled Pico platform has been built and driven but is being reconsidered in light of the move to tracks. Anyone wanting hardware today should expect to follow the design as it changes, not build a finished kit.

What distinguishes it from other open farm robots is how much of the agricultural ROS ecosystem it composes rather than reinvents — LCAS topological navigation, Fields2Cover, Nav2, Zauberzeug's Lizard and Field Friend — and a published path from research platform to something a farmer could buy. That path is candid too: phase one is a dev platform with no compliance claimed, and certified commercial sale is scheduled for 2027 or later with none of the required safety certification yet scoped.

Why it matters

Open agricultural robots tend to be either complete but single-purpose, like a weeder, or research stacks that never leave one lab. Sowbot is trying to be the shared base layer — navigation, localisation, safety and a field UI on affordable hardware — that a smallholder co-op, a university group or a startup can build their own implement on, and it does that by assembling the best existing open agricultural ROS work rather than starting again. It is early, but it is the most complete open attempt at that layer the catalogue has seen.

Problem it solves

Every agricultural robot project rebuilds the same plumbing — drivers, RTK localisation, field navigation, safety monitoring and an operator UI — before it can work on the part that matters to it. Sowbot packages that plumbing as one containerised open stack, with a reference hardware design, so a team can start from the implement instead of the chassis.

Key takeaways

  • A containerised ROS 2 Jazzy stack for field robots: RTK-GNSS fusion, topological navigation over Nav2, coverage row plans and visual crop-row following
  • Multi-row missions run end to end in Gazebo; the visual row-follower has been iterated against a real lettuce crop
  • Builds on LCAS topological navigation, Fields2Cover, Nav2 and Zauberzeug's Lizard firmware, and stays compatible with the Field Friend devkit
  • Every roadmap feature carries a status and a self-assessed TRL, most of the navigation stack at TRL 3 to 4
  • The reference hardware is an open design in progress: a fabricated two-computer brain in testing and a field chassis mid-pivot to tracks
  • A web cockpit covers teleop, e-stop, mission planning and telemetry; a diagnostics TUI covers the hardware topics
  • MIT licensed, led by the UK's Agroecology Lab with contributions from Zauberzeug

Who it is for

  • University labs and ag-tech researchers who need a shared, reproducible field-robot software base
  • Agricultural startups that want to build an implement or algorithm on an open platform instead of a proprietary one
  • Developers of open agricultural ROS packages looking for an integration target
  • Makers and smallholders prepared to follow an open hardware design while it is still changing

Limitations

  • Most of the navigation stack is at TRL 3 to 4: proven in simulation, with full field validation on hardware still pending
  • The reference hardware is unfinished — the brain is in testing, the full-size body is mid-pivot to tracks and its bill of materials is under review
  • GNSS antenna lever-arm offsets are still zeroed placeholders in the shipped configuration
  • Phase one is explicitly a development platform: no safety compliance is claimed and use is at the user's own risk
  • The real-time controller will change: the ESP32 and Lizard layer is planned to give way to a Zephyr-based controller
  • One maintainer has written the large majority of the commits, so the project leans heavily on a single person
  • The repository is a fork of Zauberzeug's devkit, and staying compatible with upstream is an ongoing commitment rather than a guarantee

This website requires JavaScript to function properly. Please enable JavaScript to explore our collection of open source robotics projects.