SSG48 Adaptive Electric Gripper
Open-source 3D-printed electric gripper that sets its grip force on every move
License
- hardware (SSG-48 repository: STL and STEP files, BOM, assembly manual, cable guide): CERN-OHL-S 2.0 (strongly reciprocal)
- manual (SSG48-gripper-docs: text and images): CC BY-SA 4.0
- driver firmware (Spectral Micro BLDC controller): GPL 3.0
- software (Spectral-BLDC Python library; MSG gripper ROS 2 driver): MIT
- robot models (Source-Robotics/robot_descriptions: URDF and MuJoCo): CC BY 4.0
Hardware: the SSG-48 repository (STL and STEP files, BOM, assembly manual, cable guide) is under CERN-OHL-S-2.0 since 4 Nov 2026, read from its LICENSE file; until then it was Apache-2.0. CERN-OHL-S-2.0 is strongly reciprocal: you may build, sell and change the gripper, but if you share or sell a modified design or hardware made from it, you must publish your design sources under the same licence. Manual: the SSG-48 manual's text and images are CC BY-SA 4.0 and its code examples MIT. Firmware: the Spectral Micro driver firmware the gripper runs is GPL-3.0. Software: the Spectral-BLDC Python library and the MSG gripper ROS 2 driver are MIT. Robot models: the URDF and MuJoCo models in robot_descriptions are CC BY 4.0, so credit Source Robotics and say what you changed. Community ROS 2 packages: Lass6230/ssg48_adaptive_electric_gripper_ros2 and LionelBirglen/SSG48_PacomeFlex_ROS2_Public have no licence file, so they are not licensed for reuse. Card image: a frame of Source Robotics' own video, not covered by the hardware licence. Checked 2026-11-12 against each repository's LICENSE file and the manual.
Overview
The SSG-48 is an open-source adaptive electric gripper from Source Robotics, the maker of the PAROL6 desktop arm. It is a two-jaw parallel gripper with a 3D-printed PETG body, a GBM5208-75 brushless gimbal motor and a Spectral Micro driver inside the body. The driver limits the motor current, so every move sets where the jaws go, how fast, and how hard they press: from about 8 N to about 80 N, by Source Robotics' calculation. The jaws stop on an object, hold it with that force and report that they found it. It has a 48 mm stroke, weighs 440 g and takes 24 V and CAN on one M8 cable. Coupler connectors fit PAROL6 and PAR6, an adapter plate fits the UR5 flange, and a template fits other robots. The STEP and STL files, bill of materials, assembly manual, firmware and control software are published, and Source Robotics also sells the gripper assembled.
The SSG-48 is a gripper designed by Petar Crnjak of Source Robotics, the company behind the PAROL6 desktop arm. Its first official release came in June 2024, tested with PAROL6, and release V2 of 4 November 2026 is the version sold today. Source Robotics sells it assembled and calibrated, and publishes everything needed to build one: the bill of materials, the print files, the assembly manual and a build guide in the SSG-48 manual.
How it grips. A BLDC motor, the GBM5208-75 gimbal motor, turns a pinion between two racks, so the two jaws move in opposite directions on an MGN7 linear rail. The Spectral Micro driver inside the body runs field-oriented control with a 14-bit encoder on the motor, so it controls the motor current and with it the torque, as in torque control. Every move command carries a position from 0 to 255, a speed from 0 to 255 and a current limit in mA. The current limit is the grip force: Source Robotics' force model gives about 8 N at 150 mA and about 80 N at 1500 mA, combined over both jaws. When the jaws stop short of the target at that current, the gripper holds the object and reports that it found one. That is what adaptive means here.
Specifications from the manual:
- 48 mm stroke, 440 g, jaw speed up to about 180 mm/s per jaw - 24 V supply, CAN at 1 Mbit/s, power and CAN on one M8 4-pin connector - a thermistor in the motor windings stops the gripper at 75 °C - external and internal grasps; fingers up to 80 mm tall and 60 mm wide on the jaw plates
Building it. The body is printed in PETG, in two hardware versions: V2 has a larger bearing on the pinion. The repository has fin-ray fingers, pinch jaws and a jaw plate template for your own end effector designs. The driver needs a one-time motor calibration over its serial port during the assembly, before the rail goes on. Source Robotics also sells the driver alone or in a starter kit with the adapters its setup needs.
Using it. Coupler connectors fit PAROL6 and PAR6, an adapter plate fits the UR5 flange, and a STEP template fits other robots. PAROL6's own software calibrates and drives the gripper. On a PC it runs from Motor GUI in the browser, from the Spectral-BLDC Python library, or from ROS 2 through a community package or the MSG gripper's driver, which speaks the same protocol. URDF and MuJoCo models of the gripper, alone or mounted on PAROL6 and PAR6, are in Source Robotics' robot_descriptions repository, with MoveIt 2 demos.
Why it matters
A gripper that can set its force lets the same arm hold a fragile object and a rigid one, and know when it has caught something; Source Robotics names assembly work and work near people as the uses. The SSG-48 brings that to an open-hardware design anyone can build, change and model, with its force, speed and position set on every move. It comes from Source Robotics, whose PAROL6 arm we already list, and it is that arm's electric gripper, so a PAROL6 builder can add one from the same files and the same maker. Because the driver, firmware, Python library and robot models are open as well, it is also a reference design for anyone building a BLDC gripper of their own.
Problem it solves
Arms built by makers and small labs need a gripper that can hold delicate objects as well as rigid ones, and that means controlling how hard it presses. The SSG-48 gives a buildable, documented gripper whose force, speed and position are set per move over CAN, with mounts for PAROL6, PAR6 and the UR5, and open software to drive it.
Key takeaways
- Two-jaw parallel gripper with a 48 mm stroke, 440 g, on 24 V and CAN
- Grip force set per move by the current limit, about 8 to 80 N by Source Robotics' model
- Detects and reports when the jaws have stopped on an object
- BLDC gimbal motor and Spectral Micro driver with field-oriented control
- Mounts for PAROL6, PAR6 and the UR5 flange, plus a template for other robots
- STEP and STL files, bill of materials, assembly manual and video, all published
- Driven from PAROL6, Motor GUI, Python or ROS 2, with URDF and MuJoCo models
Who it is for
- PAROL6 and PAR6 owners who want an electric gripper with force control
- Makers and students building a gripper for their own robot arm
- Research labs that need an affordable gripper they can modify and model
- Developers who want a reference design for a BLDC-driven gripper
Limitations
- The 8 to 80 N range is Source Robotics' calculation from an assumed torque constant, not a measured rating; its force-gauge test read about 48 N/A against the model's 54 N/A
- High currents are for short grips: a hold at 1600 mA tripped the 75 °C limit after 4 minutes, while a hold at 300 mA ran for 24 hours
- Source Robotics' own BOM says the GBM5208-75 motor can be hard to source and points to its stepper-driven MSG gripper, which the manual calls the SSG-48's successor
- A self-built gripper needs soldering and a one-time driver calibration over a 3.3 V serial adapter
- The PAROL6 and PAR6 gripper cables are wired differently: the wrong one puts 24 V on the CAN bus and destroys the driver
- Not waterproof or dustproof; rated for -5 to 65 °C
- The manual says the gripper is for development, demonstration and evaluation and is not CE, UL, FCC or RoHS compliant
- The two community ROS 2 packages have no licence file