Open Source Robotics

A curated collection of high-quality open source robotics projects, tools, and software to propel the robotics community forward.

OpenExo

Modular open-source exoskeleton for human augmentation and rehabilitation research

License

CERN-OHL-P / LGPL-3.0

Overview

OpenExo is an open-source modular robotic exoskeleton platform developed at Northern Arizona University's Biomechatronics Lab. It is designed to augment human physical capabilities and support mobility and rehabilitation research. The platform features modular mechanical hardware supporting direct drive and Bowden cable transmission systems for hips, ankles, and elbows, with multiple control levels from low-level open/closed-loop to mid-level gait phase estimation and high-level published control schemes.

OpenExo implements a modular robotic exoskeleton platform designed for research in human augmentation, mobility assistance, and rehabilitation. The system supports multiple joint configurations (hips, ankles, elbows) with both direct drive and Bowden cable transmission options. The control architecture spans three levels: low-level open/closed-loop motor control, mid-level gait phase estimation using machine learning, and high-level controllers from published research. The platform is compatible with Cubemars AK series and Maxon motors.

Why it matters

OpenExo represents a pioneering effort to make robotic exoskeleton research accessible. Developed at Northern Arizona University, it provides a modular platform that allows researchers to study human augmentation without the six-figure cost of commercial exoskeletons.

Problem it solves

Robotic exoskeletons cost $50K-$200K from commercial vendors, limiting research to well-funded labs. OpenExo provides an affordable, customizable platform for studying human augmentation, rehabilitation, and assistive robotics.

Key takeaways

  • Modular robotic exoskeleton platform for research and rehabilitation
  • Open-source hardware and software for full customization
  • Supports multiple joint configurations for different research needs
  • Developed by university researchers with peer-reviewed design
  • Designed for both human augmentation and mobility assistance studies

Who it is for

  • Biomechanics and rehabilitation researchers
  • Labs studying human-robot physical interaction
  • Assistive technology developers
  • Students exploring wearable robotics

Limitations

  • Research platform — not certified for clinical or consumer use
  • Assembly requires machining capabilities beyond 3D printing
  • Limited to specific body configurations without modification
  • Safety certification required for any human-subject testing

This website requires JavaScript to function properly. Please enable JavaScript to explore our collection of open source robotics projects.