Assembly guide for Maker's Pet Snoopy
A 300mm 3D-printed DIY pet robot with ROS2 LiDAR SLAM — Loki's bigger sibling.
License
Apache-2.0
Assembly guide
1. 3D printing
Print the 300mm parts.
1.1 Print the 300mm parts
- Download the STL or 3MF files from makerspet/3d_models (snoopy_300mm).
- Print the 300mm round base and body parts (reference: Voron 2.4r2 350mm).
- Follow the '3D printing instructions' video (youtu.be/4k6W1QyJMMw).
2. Electronics / ESP32 board
Set up the controller.
2.1 Set up the Arduino ESP32 breakout board
- Assemble the controller electronics; KiCad files at github.com/makerspet/pcb.
- Follow the 'Arduino ESP32 breakout board setup' video (youtu.be/zizGI8MjANU).
3. PC & firmware setup
One-time PC setup and firmware upload.
3.1 Set up the PC and flash firmware
- Set up the developer environment using the Kaia.ai Docker images (github.com/kaiaai/docker).
- Flash the ESP32 firmware from github.com/kaiaai/firmware.
- Follow the 'PC, firmware setup' video (youtu.be/XOc5kCE3MC0).
4. Physical assembly
Assemble the robot.
4.1 Assemble the robot
- Assemble printed parts, motors/wheels, LiDAR and electronics.
- Optionally add two bumpers, four bumper sensors and five cliff sensors.
- Mount a smartphone or 7-inch tablet as the head display/camera.
- Follow the 'Assembly instructions' video (youtu.be/WPB2B1DPf_s).
5. Bring-up & operation
Map and navigate.
5.1 Bring up the robot
- Follow the 'Bring-up instructions' video (youtu.be/L_XbkA4pwRc).
- Launch: ros2 launch kaiaai_bringup physical.launch.py robot_model:=makerspet_snoopy
- Map and navigate using Cartographer SLAM and Nav2 (see config/).