Maker's Pet Snoopy
A 300mm 3D-printed DIY pet robot with ROS2 LiDAR SLAM — Loki's bigger sibling.
License
Apache-2.0
Overview
Maker's Pet Snoopy is an open-source, 300mm round, 3D-printable DIY home pet robot compatible with the Kaia.ai software platform. Designed in Fusion 360 and ROS2-based, it does room mapping and fully autonomous navigation using a 360-degree laser distance sensor, driven by an Arduino ESP32. A smartphone or 7-inch tablet docks as its color camera and animated head display. Snoopy is the larger sibling of Loki and shares the same Kaia.ai firmware, electronics and software stack.
Maker's Pet Snoopy is a 300mm-diameter, 3D-printable companion robot built on ROS2 (Iron) and the Kaia.ai platform. It performs room mapping (Cartographer SLAM) and fully autonomous Nav2 navigation using a 360-degree laser distance sensor, running on an Arduino ESP32, with a smartphone or 7-inch tablet docked as its color camera and animated face. Optional sensing adds two bumpers, four bumper sensors and five cliff sensors. The repo ships as a ROS2 description/meta-package with URDF/SDF models, Gazebo simulation meshes, RViz configs and Cartographer/Nav2 configuration so the robot can be simulated, mapped and navigated alongside the physical build. Snoopy reuses Loki's firmware, electronics and software and is designed to be cloned and modded into your own custom robot.
Why it matters
Snoopy lowers the barrier to a genuinely autonomous home robot by combining cheap 3D-printed parts, an inexpensive ESP32, and a phone or tablet as the brain-and-face. It packages production-grade ROS2 navigation (Cartographer SLAM + Nav2) into a hobbyist-friendly, fully open kit, and the Kaia.ai platform lets makers clone, mod and share their own variants.
Problem it solves
Building a mobile robot that can map a room and navigate autonomously normally needs expensive hardware and deep ROS2 expertise. Snoopy provides a complete, documented, 3D-printable reference design plus matching firmware, electronics, simulation and config, so makers can print, assemble and run a working autonomous pet robot — and rename/customize it via the clone-and-mod workflow.
Key takeaways
- 300mm round, fully 3D-printable pet robot designed in Fusion 360
- ROS2 room mapping and autonomous navigation via a 360-degree laser distance sensor
- Runs on an Arduino ESP32; a smartphone or 7-inch tablet acts as camera and head display
- Part of the Kaia.ai ecosystem with shared firmware, electronics and a clone/mod/publish workflow
- Larger 300mm sibling of the Loki model, sharing the same software stack
Who it is for
- Robotics hobbyists
- 3D-printing makers
- ROS2 developers
- DIY electronics builders
- Educators
Limitations
- Bill of materials with exact parts/quantities/prices is not enumerated in the repo; kits live on makerspet.com / Kaia.ai
- Assembly is delivered as YouTube videos, and the main assembly video covers the Loki/Fido models rather than Snoopy specifically
- Character/skills coding is explicitly a work in progress
- Requires a separate smartphone or 7-inch tablet (not included) for the camera and head display