Assembly guide for Maker's Pet Loki
A 200mm 3D-printed DIY pet robot with ROS2 LiDAR SLAM autonomous navigation.
License
Apache-2.0
Assembly guide
1. 3D printing
Print the 200mm round-base parts.
1.1 Print the robot parts
- Download the STL or 3MF files from makerspet/3d_models (loki_200mm).
- Print the 200mm round-base parts on a desktop FDM printer (reference: Prusa MK3.5S).
- Follow the '3D printing instructions' video (youtu.be/4k6W1QyJMMw).
2. Electronics & firmware
Build the ESP32 controller and flash firmware.
2.1 Set up the ESP32 breakout board
- Build or obtain the KiCad PCB from github.com/makerspet/pcb.
- Follow the 'Arduino ESP32 breakout board setup' video (youtu.be/zizGI8MjANU).
2.2 Install libraries and flash firmware
- Install the Arduino libraries: micro_ros_kaia, LDS, PID_Timed, ESPAsyncWebSrv.
- Flash firmware from github.com/kaiaai/firmware.
- Follow the 'PC, firmware setup' video (youtu.be/XOc5kCE3MC0).
3. Assembly
Assemble the robot and mount the LiDAR.
3.1 Assemble the robot
- Mount the chosen LiDAR on its matching printed plate.
- Assemble motors, wheels, caster, battery pack and electronics into the printed body.
- Follow the 'Assembly instructions' video (youtu.be/WPB2B1DPf_s).
4. Bring-up & software
Run the ROS2 / Kaia.ai stack and drive the robot.
4.1 Set up the PC stack and bring up the robot
- Use the PC setup from github.com/kaiaai/docker.
- Run mapping (Cartographer) and navigation (Nav2) via the Kaia.ai launch files.
- Follow the 'Bring-up instructions' video (youtu.be/L_XbkA4pwRc).