MABEL
Open-source 56-DOF mobile bimanual robot, teleoperated whole-body from a Vision Pro
License
- software: Apache 2.0
- hardware design files (CAD, PCB): CERN-OHL-S 2.0 (strongly reciprocal)
- documentation and media: CC BY 4.0
Split licensing. The software is Apache-2.0, the hardware design files (CAD, PCB) are CERN-OHL-S-2.0, a strongly reciprocal open-hardware licence that requires modified designs to be shared under the same terms, and the documentation and media are CC BY 4.0. Upstream components keep their own licences, listed in THIRD_PARTY_NOTICES.md: the arms derive from OpenArm and the hands from the ORCA Hand. Checked 4 Nov 2026.
Overview
MABEL is an open-source mobile bimanual robot from New York University and the University of Toronto: a three-module swerve base, a vertical lift, a pitching torso, a 3-DOF head with stereo cameras, two 7-DOF arms derived from OpenArm and two 17-DOF hands derived from the ORCA Hand, 56 degrees of freedom in all. It is teleoperated whole-body from a single Apple Vision Pro without hand-held controllers. One repository holds the bill of materials, STEP CAD, a KiCad base carrier board, firmware, a ROS 2 Jazzy workspace with Nav2, a MuJoCo twin, teleoperation apps, and imitation- and reinforcement-learning pipelines. The authors' costed BOM puts the three reference builds at about $8,060, $9,280 and $14,720 in parts.
MABEL combines published sub-assemblies with its own structure: the arms are built from OpenArm, the hands from the ORCA Hand, the base from three REV MAXSwerve modules, and the torso from a commercial lift column; the MABEL-specific parts are printed or machined from the full-robot STEP assembly, and a two-layer base carrier board is published as KiCad sources with Gerbers.
The software follows three rules: one hardware bridge is the only process that opens a bus, port or camera; one controller is the only gate on motion, so the Vision Pro, a browser, a gamepad, Nav2 or a learned policy all send commands through the same wire protocol and safety check; and the MuJoCo model is the single source of geometry, inertia and limits. Because the simulated twin speaks the same contracts, every client runs unchanged against it, and the repository's guide is ordered so that the first five steps (simulate, teleoperate, collect demonstrations, curate data, train) need no hardware.
Demonstrations go through a curation step into LeRobot format for training ACT, diffusion policy or π₀ policies, and reinforcement learning runs in mjlab. The BOM, priced on 31 July 2026, splits into a fixed core of 49 lines (about $7,650) and five interchangeable choices (compute, wrist, head and base cameras, lidar), which give the Essential, Recommended and Maximum builds.
Why it matters
Open mobile manipulators usually stop at one layer: a base, an arm, or a software stack for someone else's hardware. MABEL publishes every layer of a mobile bimanual robot with dexterous hands, from CAD and a carrier board to firmware, teleoperation, simulation and learning, built on two open designs we already list (OpenArm and the ORCA Hand). Labs can start in simulation, collect data and train before buying parts, then bring up the real robot with the same code (GitHub).
Problem it solves
Building a capable mobile robot with two arms and dexterous hands has meant either buying a closed commercial platform or integrating separate parts and software yourself. MABEL provides one documented design with a costed bill of materials, a single control path for teleoperation and learned policies, and a simulated twin of the same robot, so a team can reproduce the whole system rather than assemble it from scratch.
Key takeaways
- 56-DOF mobile bimanual robot: swerve base, lift, pitching torso, 3-DOF head, two 7-DOF arms and two 17-DOF hands
- Arms derived from OpenArm and hands from the ORCA Hand; custom parts printed or machined from the full-robot STEP assembly
- Whole-body teleoperation from an Apple Vision Pro, with ROS 2 Jazzy, SLAM and Nav2 for the base
- MuJoCo twin with 30 scenes, plus LeRobot imitation learning (ACT, diffusion policy, π₀) and RL in mjlab
- Costed BOM: core about $7,650 (49 lines); Essential, Recommended and Maximum builds about $8,060, $9,280 and $14,720
Who it is for
- Research labs that want a reproducible mobile bimanual platform with dexterous hands
- Teams collecting whole-body teleoperation data for imitation learning
- Robot-learning groups who want to simulate, collect data and train before building hardware
- Builders who already know OpenArm or the ORCA Hand and want a full robot around them
Limitations
- A large build: two OpenArm arms, two ORCA hands, a swerve base, a lift and custom machined parts, with costs from about $8,060 in parts
- Teleoperation needs an Apple Vision Pro, and the real robot runs on an NVIDIA Jetson with Ubuntu 24.04
- The authors list 7 open items and an uncosted gap of about $528 to $1,118, and prices date from 31 July 2026
- MABEL-specific assembly is documented as print or machine the parts from the STEP; the arm and hand sub-assemblies follow their own upstream guides
- Released in November 2026, so it is new and not yet built outside the original team