HapCompass
Open-hardware wearable haptic device for contact-rich robot teleoperation
License
MIT
Overview
HapCompass is an open-hardware wearable haptic device for contact-rich robotic teleoperation. It renders 2D directional cues by mechanically rotating a single linear resonant actuator (LRA), whose asymmetric vibration produces a directional sensation for the operator. By mapping a robot's tactile measurements into directional haptic feedback, HapCompass improves teleoperation performance on contact-rich tasks such as key and USB insertion, and yields higher-quality demonstrations for imitation learning. The repository ships everything needed to build one: a bill of materials, step-by-step assembly instructions, the editable Fusion 360 source design (.f3z), and printable STL parts. Presented at ICRA 2026 by researchers at the Toyota Technological Institute at Chicago and the University of Chicago; released under the MIT license.
HapCompass tackles a core teleoperation problem—operators can't feel what the robot touches—with a deliberately simple mechanism: instead of a dense tactile array, it rotates a single LRA so that one actuator can point its asymmetric vibration in any 2D direction. The robot's contact measurements are mapped to a direction and rendered to the operator's skin, giving an intuitive "which way is the contact" cue. The result is better success on contact-rich insertion tasks and cleaner human demonstrations for downstream imitation learning. The project is fully reproducible: BOM, assembly guide, Fusion 360 source, and printable STLs are all in the hardware directory.
Why it matters
Teleoperation for contact-rich manipulation is hard because vision alone misses fine contact dynamics, and rich tactile-feedback hardware is typically complex and expensive. HapCompass shows that a single rotating actuator can deliver useful directional haptic feedback at low cost, measurably improving both task success and—crucially—the quality of the human demonstrations that data-hungry imitation-learning pipelines depend on.
Problem it solves
Operators teleoperating robots for contact-rich tasks cannot feel contact, which hurts task performance and the quality of collected demonstrations, while existing haptic-feedback hardware tends to be complex and costly.
Key takeaways
- A single rotating linear resonant actuator renders 2D directional cues—far simpler/cheaper than tactile arrays
- Maps the robot's tactile measurements into intuitive directional feedback for the operator
- Improves performance on contact-rich teleoperation tasks like key and USB insertion
- Produces higher-quality demonstrations for imitation learning
- Fully open hardware: BOM, assembly instructions, Fusion 360 source (.f3z) and printable STLs (MIT)
Who it is for
- Teleoperation researchers
- Imitation-learning teams collecting demonstrations
- Haptics and wearable-device makers
- Manipulation labs working on contact-rich tasks
Limitations
- Renders directional (2D) cues, not full force magnitude or texture
- Building one requires a Dynamixel servo, a driver board, and 3D printing
- Validated on a specific set of contact-rich insertion tasks
- Device-control and tactile-mapping software is not yet fully released in the repo