Project highlights: 17 to 27 September
- Source: Open Source Robotics
- Published: 2026-09-28
- Category: upstream
Three long-awaited releases landed, PX4 and Isaac Lab dropped old paths on their main branches, and two open robot arms gained new camera mounts, a soft gripper and a leader-arm model.
MuJoCo
!MuJoCo
- Version 3.14.0 keeps <frame> elements when you save a model to MJCF, with their position and orientation, instead of folding them into the children. An edited model now reloads with the structure you wrote. - Several sensor readings change. Force and torque sensors now include forces from spatial tendons, torque from weld constraints is now computed correctly, and a tendon's actuatorfrcrange now applies without setting actuatorfrclimited, so tendon-driven hands and grippers may behave differently after the update. - It has breaking changes: mj_readCtrl has a new signature for actuators with several inputs, and a spec's signature reads 0 until it is recompiled. It also adds an experimental ipc mode for cloth and other flexible bodies that cannot pass through each other: Release notes.
GTSAM
!GTSAM
- Version 4.3.0 is the first stable release of the 4.3 line. It moves to C++17, removes the code that was deprecated in 4.2 and drops much of the Boost dependency, so projects still using 4.2's deprecated calls will need changes before they build. - It adds experimental CUDA solvers for bundle adjustment and general nonlinear optimisation, with Python bindings, and new GNSS factors for pseudorange, carrier phase, RTK double differences and Doppler measurements alongside a larger set of IMU and filtering tools. - IncrementalFixedLagSmoother has moved from gtsam_unstable into the stable library, riSAM adds robust incremental smoothing, and the new documentation site has examples that run in Google Colab: Release notes.
DimOS
!DimOS
- Version 0.0.14 adds a browser Cockpit, started with --local-relay, with the robot's video, a 2D map where you click to set a goal, keyboard teleoperation and agent chat, plus a web SDK for building your own pages. - Manipulation now plans a robot as one model with planning groups, so two-arm and mobile manipulators move as a single coordinated robot. RoboPlan is the default planner, and there is new support for the Galaxea R1 Pro, the Deep Robotics M20 and, experimentally, Boston Dynamics Spot. - There are many breaking changes. Zenoh is now the default transport and only listens on the local machine unless you pass --robot-ip, the Docker images have moved to Docker Hub under dimensional/, and the Unity simulator is gone, so read the breaking-changes section before upgrading: Release notes.
Isaac Lab
!Isaac Lab
- The main branch now uses PyTorch 2.12 with CUDA 13.0 wheels on every platform, for Blackwell GPUs. This needs NVIDIA driver 580.65.06 or newer on Linux, or 580.88 on Windows, so check your driver before pulling. - The demo scripts have moved: run them with isaaclab demo <name> or isaaclab example <name>, which also work from the released package through uvx, as the old scripts/demos paths are gone. The shipped robot configurations also changed format, and code that edits them in place needs updating. - The Jacobian used by the differential IK and operational-space actions is now correct for tasks that set a body_offset, such as the Franka IK tasks, so trained policies may behave differently. The operational-space controller also no longer produces effort spikes near singularities: Changes.
PX4 Autopilot
!PX4 Autopilot
- jMAVSim has been removed from the main branch, so make px4_sitl jmavsim and airframe 10017 no longer exist. Use PX4's built-in SIH simulator with the Hawkeye viewer (make px4_sitl_sih sihsim_quadx), or Gazebo, and note that the setup scripts no longer install Java. - A new Parking mode extends Manual mode for rovers, for manoeuvring precisely in tight spaces with a joystick. - PCA9685_SCHD_HZ is gone: PCA9685_PWM_FREQ now sets both the output frequency and the update rate. If you had changed the old parameter, set the new one after upgrading, and note that frequencies above 400 Hz are no longer supported: Changes.
PlotJuggler
!PlotJuggler
- Version 4.0.0 is the first PlotJuggler 4 release with a 4.x number, after a run of 3.999 builds. It comes as a Linux AppImage, a Debian package and a Windows installer, with loaders for MCAP, PX4 ULog, LeRobot, Parquet and live ROS 2 installed from its Marketplace. - On Ubuntu 22.04 or later and Debian 12 or later, you can now install it from an apt repository, so apt upgrade picks up new versions. Before, a downloaded .deb never updated. - Since 3.999.9 it records live streams straight to MCAP and shows elevation maps in 3D. Packaged builds send one anonymous ping per launch, which you can turn off in Preferences or with PJ_DISABLE_TELEMETRY: Release notes.
Rerun
!Rerun
- Version 0.38.1, the first 0.38 release, adds a Measurements type for scalar sensor data. The MCAP importer now maps ROS scalar sensor messages to it, so existing views of imported ROS bags may need adjusting. - A new LeRobotReader streams LeRobot datasets one episode at a time without loading them whole, and task labels no longer go missing on v3 datasets written with LeRobot 0.5.0 or later. - The chunk API has moved out of rerun.experimental into rerun.chunk, Python 3.10 is deprecated, and Python scripts can now control a running Viewer and its time cursor: Release notes.
Strands Robots
!Strands Robots
- Version 0.5.2 drives real robots through its own drivers rather than through LeRobot. Robot(name, mode="real", driver="strands") now covers the Unitree G1 and Go2, Booster T1, Franka, UR5e and UR10e, the Robotiq 2F-85 gripper, Crazyflie, Reachy Mini, and SO-100 and SO-101 arms on Feetech or Dynamixel servos. - Any call that would move real hardware now pauses the agent until an operator answers, and the pause says how to pre-approve a single command for an unattended run; stop commands are never held. The operator dashboard is back, with passkey sign-in and an e-stop. - It has breaking changes. Scripts that drive real robots through use_unitree, serial_tool, pose_tool or the Robot tool without a person present must now answer that pause, and device_connect admits nobody until you set its allowlist. lerobot_calibrate, the vera and motionbricks providers and the bundled LIBERO suite have been removed: Release notes.
Microduck
!Microduck
- Across daemon releases 0.14.0 to 0.15.0, the phone app gained two controls. It can stand the robot up and start a policy, and it can reboot a servo that has shut down on overload or heat, which before meant ssh or pulling the battery. - The robot's state now carries each joint's velocity and current as well as its position. Current is the duck's only measure of load, such as a foot taking weight or a servo heading for an overload shutdown. The servo bus now also reads every servo in one reply by default. - A duck simulated in MuJoCo now signs in and shows up in your robot list like a real one, marked as simulated and streaming its camera, so you can test remote control without a board. Strands Robots 0.5.2 also added the Microduck as a simulated and real robot: Changes.
reBot Arm B601
!reBot Arm B601
- The wrist camera mounts have been redrawn and are now listed in the README, for a 32 mm UVC camera, the Intel D435i, the Intel D405 or Orbbec Gemini 305, and the Orbbec Gemini 2. There is also a new mount file for the RealSense D455f, so if you have already printed a mount, compare it with the new file. - A new DIY soft finger is a TPU finger (95A or harder) on a printed ABS or PLA mount, for grasping things the rigid fingers would crush or let slip. - For the RS version with RobStride motors, the Gripper Connector B metal part is now in the repository. LeRobot can now drive RS arms with --robot.motor_family=rs, with the Damiao version still the default: Changes.
SO-101 Open Robot Arm
!SO-101 Open Robot Arm
- A URDF for the leader arm, the one you move by hand to teleoperate, now sits beside the follower's. It shares the follower's five arm joints and calibration, and replaces the gripper with the handle, wrist roll and trigger, which keeps the joint name gripper. - The trigger's zero position, its 0 to 45° travel and the part inertias come from the CAD and an estimated print density, not from a measured arm, and there is no MuJoCo version yet, so check it against your own leader: Changes. - In MuJoCo Menagerie, the SO-101 model now includes the wrist camera's mounting board, and the camera's position was calibrated against a real arm, so the simulated wrist view is closer to the real one: Changes.
Grabette
!Grabette
- The Orbbec Gemini 305 is now the default depth camera, and the Luxonis OAK-D SR is kept as a supported alternative. The Gemini is mounted upside down to route its cable, and frames are now rotated at capture so recordings look the same as from an upright camera. - Running make install-rpi again on an OAK-D Grabette without CAMERA=oakd will switch it to the Gemini. A rig that carries the Gemini upright should set GRABETTE_ORBBEC_ROTATE_180=false: Changes.
Why it matters
Two things ran through these weeks. Several projects removed things people rely on rather than just adding to them: jMAVSim in PX4, the old demo paths in Isaac Lab, the old default transport in DimOS and the code GTSAM deprecated in 4.2. Updating now means reading the upgrade notes, not only the new features. At the same time, simulation got closer to the real hardware. MuJoCo sensors now report tendon and weld forces correctly, the Menagerie SO-101 has a wrist camera calibrated against a real arm, the SO-101 leader arm has a model of its own, and Grabette's recordings no longer depend on which way up its camera sits. If you train in simulation and deploy on one of these arms, recheck your sensor readings and camera placement after updating, because the numbers your policy learned from may have moved.