Robotiq now maintains the open-source software for its grippers
- Source: Robotiq
- Author: Open Source Robotics
- Published: 2026-09-22
- Category: business
Robotiq has published official, BSD-licensed ROS 2, C++ and Isaac Sim packages for its adaptive grippers, taking over work the community has kept alive for years. Existing setups carry over unchanged. PickNik's community driver still exists alongside it, and no joint handover has been announced.
Robotiq now officially maintains the open-source software for its adaptive grippers, having published three repositories on github.com/robotiq on 22 September: a C++ SDK, ROS 2 packages, and Isaac Sim assets. All three carry the BSD 3-Clause licence, and they are the first pieces of Contact Core, the company's declared software layer for physical AI.
The part that matters is not the code so much as who is now on the hook for it. Robotiq's 2F grippers have worked in ROS 2 and NVIDIA Isaac Sim for years because outside developers wrote the drivers and kept them building — chiefly PickNik Robotics, whose ros2_robotiq_gripper is the package most labs actually run. Robotiq's own announcement credits that work directly, and says a good deal of it is still visible in what shipped.
The new ROS 2 repository describes itself as the maintained continuation of the PickNik package. Package names, launch files, controller names and the /robotiq_gripper_controller/gripper_cmd action are unchanged, so at the workspace level it is a drop-in replacement. It supports Humble, Jazzy and Lyrical from a single branch, picking the right controller config from $ROS_DISTRO — the gripper action type differs on Humble because parallel_gripper_controller only arrived in Jazzy. The same repository also carries a driver for the TSF-85 tactile sensor, including a ROS 1 Noetic branch.
The Isaac Sim assets ship USD models of the 2F-85 with two physics configurations, compliant and parallel-grip, which is what Robotiq means by closed-loop kinematics: the four-bar linkage that makes these grippers adaptive is simulated rather than approximated by a parallel jaw. For anyone generating training data on a gripper that will later close on a real object, that difference is the whole point.
One thing to keep straight. PickNik's repository is not archived and has commits as recent as 8 September, and carries no notice of a handover. "Maintained continuation" is Robotiq's characterisation of what it has done, not a transfer anyone has announced jointly. Two packages with the same interfaces now exist, which is better than none but is not the same as a clean succession.
Robotiq frames all of this as answering demand from physical AI — higher-fidelity simulation, tighter control loops, and more of what a gripper can report about what it is holding — and says packages maintained in spare hours were never meant to carry that weight. The company has also said the next step is embedded intelligence at the point of contact, expected in Q4. That part is proprietary and not yet released, so what exists today is three BSD-licensed repositories and a promise.
Why it matters
Component vendors usually leave ROS support to whoever needs it, and the packages that result are maintained in evenings by people who do not work for the company whose hardware they are enabling. A gripper maker picking that burden up, under a permissive licence and matching the community interfaces rather than replacing them, is the pattern worth watching — and worth checking a year from now to see whether the commitment held.
Key takeaways
- Three repositories published on 22 September under BSD 3-Clause: a C++ SDK, ROS 2 packages and Isaac Sim assets
- The ROS 2 packages keep PickNik's package names, launch files, controller names and gripper action, so switching workspaces is meant to cost one line
- One branch supports Humble, Jazzy and Lyrical, choosing the controller config from $ROS_DISTRO
- The Isaac Sim assets model the 2F-85's four-bar linkage with compliant and parallel-grip physics configurations rather than approximating it as a parallel jaw
- PickNik's driver is still active and unarchived, so this is a parallel continuation rather than an announced handover
- These are the first pieces of Contact Core, Robotiq's software layer for physical AI; the embedded tactile intelligence it promises is proprietary and expected in Q4
Open-source angle
All three repositories are BSD 3-Clause, which is the same licence as the community driver they continue, so nothing has been closed off. GitHub currently reports the Isaac Sim assets as having no recognised licence; the LICENSE file in that repository is the standard BSD 3-Clause text, copyright 2026 Robotiq. The genuinely proprietary part is what has not shipped: Embedded Tactile Intelligence, the wrist-level processing Robotiq says is coming in Q4, is described as its own intelligence and is not part of these releases.
Related technologies
- ROS 2
- NVIDIA Isaac Sim
- ros2_control
- USD
- PickNik ros2_robotiq_gripper
Links
- Source: https://robotiq.com/contact-core-robotiq