Actuator
- Category: Actuation & drivetrain › Motors
- Tags: actuation, hardware
Component converting energy into motion for robot movement and manipulation.
Definition
Actuators convert energy into physical motion to move robot joints and mechanisms. Types include electric motors, hydraulic cylinders, pneumatic cylinders, and piezoelectric devices. Selection depends on force, speed, precision, and environment.
Why it matters
An actuator is whatever converts a control signal into physical motion — the component that makes a robot a robot rather than a sensor package. The choice of actuator is the single most consequential hardware decision in a design, because it sets torque, speed, precision, compliance, noise, cost and how the machine behaves when something goes wrong. Two robots with identical geometry and software will feel entirely different if one uses geared servos and the other quasi-direct drives.
Key applications
- Robot joints across arms, legs and wrists
- Grippers and end effectors, including vacuum and pneumatic variants
- Mobile base drive, from geared DC motors to direct-drive hub motors
- Linear motion via lead screws, belts and linear actuators
- Compliant and series-elastic actuation for safe physical interaction
- Micro-actuation in surgical and laboratory instruments
In practice
Low-cost arms use geared servo actuators because they are self-contained and cheap. Legged robots increasingly use quasi-direct drive, accepting lower gear ratios and higher current in exchange for backdrivability — the ability to be pushed and to sense contact through motor current rather than a dedicated force sensor. Industrial arms use high-ratio harmonic drives for stiffness and precision at the cost of being effectively unbackdrivable. Each choice determines whether the robot is safe to be near, and whether it can detect that it has hit something.
Common misconceptions
- Actuator means electric motor — pneumatic, hydraulic, shape-memory and piezoelectric actuators are all in use
- More torque is better — torque comes from gearing, which costs speed, adds backlash and reduces backdrivability
- Actuator specifications describe joint behaviour — the transmission between actuator and joint changes everything downstream
- Stall torque is usable torque — holding at stall overheats most actuators quickly, and continuous ratings are far lower
Who should know this
- Anyone designing or specifying a robot joint
- Buyers comparing arms and legged platforms across actuation types
- Engineers deciding whether a robot can be safely backdriven by a person
- Students learning why actuator choice constrains control strategy
- Anyone diagnosing overheating, backlash or unexpected stiffness
Related technologies
- Servo motor
- BLDC motor
- Harmonic drive
- Series elastic actuator (SEA)
- Pneumatic artificial muscle
- Piezoelectric transducer
- Linear actuator
- Hydraulic cylinder
Related terms
Related projects
- pib: pib is an open-source 3D-printable humanoid robot designed for STEM education
Related products
- AK10-9 V3.0 KV60: CubeMars
- AK45-36 KV80: CubeMars
- AK70-10 KV100: CubeMars
- AK80-64 KV80: CubeMars
- HTPU-70BM-35-NE: High Torque Robotics
- KAH Integrated Actuator Module: Leaderdrive
Videos
- What is an Actuator?: RealPars